Canteen Table and Chair

Overall size 1200 * 600 * 750

(1) Desktop specifications: 1200 * 700 * 25mm, with 13mm thick multi-layer board and 12mm thick rock board as substrates. The desktop is scratch resistant, wear-resistant, fire-resistant, corrosion-resistant, easy to clean, and must undergo drying, anti-corrosion, and insect proof treatment. The moisture content of the wood meets the GB/T3324-200 standard, the surface is flat, and the thickness is uniform; Painting process: High quality environmentally friendly water-based paint is used, and the product must be polished 4 times, coated with 5 times of environmentally friendly primer, and coated with 3 times of PU environmentally friendly topcoat. All wood visible surfaces must be coated with a closed paint process, with a benzene content of less than 0.05%; Wooden edge banding technique for edge banding, seamlessly integrated.

(2) The table legs and columns are made of 50 * 106 * 1.2mm hexagonal shaped galvanized steel pipes that are formed in one go. The profile has a large cross-sectional area, good stress resistance, and is sturdy and stable without shaking. After CO2 protection welding, polishing, shot blasting, surface electrostatic spraying, and high-temperature curing treatment, it is permanently rust free.

(3) The desktop support frame is made of 20 * 40 * 1.5mm rectangular tubes and 50 * 50 * 1.5mm square tubes welded together (both rectangular and square tubes are made of 1.5mm thick stainless steel tubes that have undergone polymer nano treatment (baking paint process), with good load-bearing capacity, beautiful appearance, smooth surface, and no unevenness that may cause dust and ash accumulation.). "

(4) Chair: Size L480 * D530 * H830, seat height 450mm

Chair surface: The chair surface adopts a Mongray chair surface, and the chair surface design conforms to ergonomics. The curve fully conforms to the curves of the buttocks and waist, and the bulging of the waist curve is based on better support from the lumbar spine. The backrest height reaches 3/5 of the height of the upper body of the human body, providing a more comfortable user experience. The front end of the seat is slightly raised and thick, and the curve quickly bends downwards, which is more in line with the curve of the knee joint. During use, there will be no discomfort or discomfort caused by the edges. The material is made of PP+fiberglass, which ensures that the seat surface will not deform under high temperature, low temperature, and long-term load. It has passed a pressure test of up to 500 kilograms.

Chair surface installation: The chair surface adopts a suspended support fixed connection, and the connection adopts a customized flexible soundproof ring.